CALL 1300 665 755 (AUS) OR 0800 665 755 (NZ)

The new 27,000sqm Northline facility in Regency Park, South Australia utilised the tried and tested Dramix fibre only jointless solution for the internal slabs. With the external slabs adopting a Dramix Combi Slab, enabling the removal of all saw cuts and all dowelled joints from the pavement. Having no joints makes for the most efficient design with the additional benefit of long term reduced maintenance cost with the removal of costly jointing systems.

Design Engineers
BOSFA / FMG Engineering
Contractor
Maranello Concrete Constructions PL

External apron slabs and hardstands, 12,0002, for 100t axle load Container fork lift and containers.

Internal waste transfer processing slab 2000m2 to handle very aggressive domestic waste with low PH level.

Owner: Veolia waste management
Builder: Lipman Construction
Engineer: Costin Roe
Location: Banksmeadow, Sydney
Application: Dramix® Combi Slab

This was an internal slab for a recycling facility with heavy equipment and forklifts. Dramix 4D Combi Slab was used to remove all the joints and the inherent ongoing maintenance cost associated with saw cuts having to be re-sealed and saw cuts not initiating.

Over a year since the Dramix Combi Slabs were placed at the Ceva Vehicle Logistics facility in Pinkenba and they remain in excellent condition. The saw-cut free fully restrained Combi Slab solution was chosen to accommodate some heavy loads, along with the poor ground conditions. And whilst other areas are suffering from ground support issues, the Internal Warehouse slabs are performing perfectly with no such concerns.

DRAMIX 4D SEAMLESS FLOOR

Postal handling facility

25t post load

Restraint conditions

Client requirement no joints

Time restraints for const.